Soldering Expert With 18 Years Of Experience
- All Products Are 100% Genuine And Brand New.
- 1 Week Fast Delivery For In-Stock Products.
- 7x24 After-Sales Consultation.
- MOV 999 USD.
Contact: sales@3a-feeder.com
Metcal / 40+ Years
Metcal is a Innovative Benchtop Solutions Expert that has Delivered Broad Value to Customers Since its Silicon Valley Beginnings in 1982.
Type
- Soldering system.
- Desoldering system.
- Fume extraction system.
- Hot air convection system.
- Soldering tips & accessories.
Professional Engineer
Dedicated engineers are assigned to assist you from the initial communication stage through technical support, order confirmation, shipping, and after-sales.
Our Products
Advanced Soldering and Rework System
CV-5210
- SmartHeat® Power-on-Demand Technology
- Patented Connection Validation™ IMC Formation Technology
- 2.8” color touchscreen with bold graphics
- Communications Port for process traceability data and firmware upgrades
- Precise tip temperature display
- Integrated Net Power Meter and Power graph
- Patented Chip-in-Cartridge technology
- Closed loop bi-directional communication
Soldering Desoldering and Rework Series
MX-5200
- A built-in Net Power Meter displays a graphical and numerical representation of the power applied to the cartridge.
- User Programmable Power Save Mode: the time to enter Power Save Mode is adjustable from 10 to 120 minutes.
- Ground Fault Interrupt: AC ground monitor detects power line ground failures and immediately alerts the operator and shuts down the system.
- Universal Power Supply: automatically senses the input line voltage and adjusts accordingly, which allows for worldwide operation without adaptors or a change in performance.
- Full compatibility with existing and previous MX upgrade kits, tip-cartridges, handpieces, and accessories.
MFR Single Port System, SSC Soldering Cartridge
MFR-1160
- SmartHeat® Technology provides exceptional power for high thermal demand applications
- Single or Dual simultaneous outputs allow for single/dual hand-piece use
- Five hand-pieces available for increased application solutions for soldering
- Desoldering (upgrade kit MX-UK5) and rework on one system
- Each hand-piece has a comprehensive range of cartridges or tips for maximum flexibility
- Ergonomic handpieces for operator safety and comfort
Fume Extraction Systems BVX 200 Series
BVC-250
- Easy 30-Second Filter Changes
- LED Status Ring
- 2x the Suction of Previous Models
- 99.97% Efficiency HEPA 13 Filter
- Optional Deep Bed Gas Filter (FG-BVX250, sold separately)
- 360-degree Rotating/Removable Air Diverter
- Communicates with Metcal CV & GT Series Soldering Systems
- Small Footprint for Under or On the Benchtop
Hot Air Convection System
HCT-910
- Versatile 900-watt hot air rework tool for soldering and desoldering applications
- Max temperature of 600 °C (1112 °F)
- Max airflow up to 120 l/m (4.2 cfm)
- Digital controls for both airflow & temperature for increased precision
- On-the-fly manual mode - quickly toggle between temperature and flowrate
- Handpiece start/stop button & status light
- Tool-less nozzle removal & replacement
- ESD compliant
- TUV certified, CE listed, RoHS
PS-900 Soldering System
PS-900
- SmartHeat® temperature control
- Ergonomic, lightweight handle
- Rugged cast aluminum housing
- Added plating thickness to tips
- Low cost, quick-change heater coil
Soldering Tips
Solder ing Tip Cartridges
STTC Series
- The standard soldering tip range for the Metcal MX-500, MX-5200 and MX-5200 series soldering systems
- 600-series nominally 330 ˚C, 700-series nominally 390 ˚C and 800-series nominally 450 ˚C
- 600-series is STTC/SMTC-0xxx, 700-series is STTC/SMTC-1xxx and 800-series is STTC/SMTC-8xxx
Soldering Tip Cartridges
SMTC Series
- The standard soldering tip range for the Metcal MX-500, MX-5200 and MX-5200 series soldering systems
- 600-series nominally 330 ˚C, 700-series nominally 390 ˚C and 800-series nominally 450 ˚C
- 600-series is SMTC-0xxx, 700-series is SMTC-1xxx and 800-series is SMTC-8xxx.
Soldering Tip Cartridges
SSC Series
- The standard soldering tip range for the Metcal SP-200 and MFR-series soldering systems
- 600-series nominally 330 ˚C and 700-series nominally 390 ˚C
- 600 will all be SSC-6xxA and series and 700 will be SSC-7xxA
Soldering Tip Cartridges
CVC Series
- CVC-, SMC- Soldering Tip Cartridges are the standard soldering tip range for the Metcal CV-5200, CV-500, MX-500, MX-5200 and MX-5200 series soldering systems.
- 600 Series, nominally 330 ˚C, 700 Series, nominally 390 ˚C, 800 Series, nominally 440 ˚C, and 900 Series, nominally 470 ˚C.
- CVC-/SMC-6xx, 700-series will be CVC-/SMC-7xx, 800-series will be CVC-/SMC-8xx and 900-series will be CVC-/SMC-9xx
Soldering Tip Cartridges
SFV Series
- SxV-Soldering Tips are the standard soldering tip range for the Metcal PS-900/MFR1100, MFR-2210, MFR-1351-series soldering systems
- The temperature series SFV are nominally 390 ˚C
- Can be used with leaded and lead-free solder The Metcal "SmartHeat®-Technology" automatically adjusts power levels during each soldering operation
Soldering Tip Cartridges
STV Series
- SxV-Soldering Tips are the standard soldering tip range for the Metcal PS-900/MFR1100, MFR-2210, MFR-1351-series soldering systems
- STV-series are nominally 330 ˚C for light load application
- Can be used with leaded and lead-free solder The Metcal "SmartHeat®-Technology" automatically adjusts power levels during each soldering operation
Soldering / Desoldering Accessories
PS-900 Coil Assembly
PS-CA3
- PS-900 Coil Assembly
- PS-900 coil assembly for SxV soldering and CsV blade tips only.
Workstand
GT-WS
- GT Workstand for T4/T6 Hand-Piece
- Workstand for T4 and T6 hand-pieces
Coil and Cable
PS-HC3
- Assy, Coil and Cable, PS-900
- PS-900 hand-piece and coil assembly
Special Offer - Big Discount
MFR Series
MFR-2210
- SmartHeat® Technology provides exceptional power for high thermal demand applications
- Single or Dual simultaneous outputs allow for single/dual hand-piece use
- Five hand-pieces available for increased application solutions for soldering
Digital Hot Air System
HCT2-120
- 120W Ceramic Heater + Two-Stage Air Pump: Delivers stable thermal energy output.
- LED screen shows real-time temperature (±10% tolerance) and airflow intensity.
- Pencil-style handle, weighs approximately 2.63 kg, with a nozzle bracket included.
- Quick-Change Components: Heater (HCT-HTR120) and nozzle kit (6 sizes) enable tool-free quick change in seconds.
Soldering Desoldering and Rework Series
MX-5010
- Metcal Advanced™Soldering Hand-piece
- Metcal TipSaver™Workstand
- Highlyeffective for soldering applications
Advantage
Fixed Temperature Process Control
Improve process control with SmartHeat™ products designed to remove temperature variability
Fume Extraction
Create a safe, healthy and productive environment for operators on the manufacturing floor.
Precision & Small Components
Soldering handpieces, tips, and cartridges made for working with micro components under the microscope.
Adjustable Temperature
Increase throughput and quality with Metcal’s patented inductive heating adjustable temperature soldering solutions.
High Thermal Demand
High performance soldering systems, tips and cartridges for the heaviest demanding solder applications.
SMT Rework Tools & Applications
Soldering handpieces, tips, and cartridges made for working with micro components under the microscope.
Common Questions
Most Popular Questions.
We have listed some questions you may ask. If you have more inquiries about our products, you can send an inquiry to contact us.
Our extensive inventory supports the supply of nearly every Metcal product on the market, even those that have been phased out of production.
We assure our commitment to supplying products that are 100% factory-original, genuine, and in brand-new condition.
MOV is 999 USD.
For in-stock products, the lead time is 1 week. For booking products, the lead time typically ranges from 2 to 4 weeks.
Our Warehouse
Supplying the global market, we provide Metcal products backed by a 100,000 sq ft warehouse that guarantees stock availability.
18+
Years of Experience
About Us
Advance Automation Application Sdn. Bhd. leverages 18 years of soldering expertise to distribute Metcal products. With a 100,000 sq ft warehouse ensuring ready-stock capability, we supply the global market.
.
Contact : sales@3a-feeder.com
Want to find an efficient and reliable supplier?
- 100% from Metcal.
- MOV 999 USD.
- 24/7 after-sales support.
- On-time delivery and global logistics support
Contact: sales@3a-feeder.com
Send Request Now !
Please send us your request with your part number, quantity, demand etc., let’s start our cooperation.